Bennett/Bennett COMP12111: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
|||
| Line 2: | Line 2: | ||
== Using Bennett in Tootil == | == Using Bennett in Tootil == | ||
Bennett is availble on the lab machines in the tootil labs. | Bennett is availble on the lab machines in the tootil labs. There is no ability to use Bennett for COMP12111 off campus. | ||
Before starting bennett, you will need to have synthesised your MU0 design. This should be done from Questa, please see the lab manual. | Before starting bennett, you will need to have synthesised your MU0 design. This should be done from Questa, please see the lab manual. | ||
Revision as of 09:21, 3 September 2025
Using Bennett in Tootil
Bennett is availble on the lab machines in the tootil labs. There is no ability to use Bennett for COMP12111 off campus.
Before starting bennett, you will need to have synthesised your MU0 design. This should be done from Questa, please see the lab manual.
Once synthesized, again from Questa, download the MU0 design. Please see the current lab manual for more details.
Open a terminal and run start_bennett_121
Bennett should
Troubleshooting
- Numbered list item
- If bennett doesn't start, ensure the lab board is plugged in and powered up.
- If bennett still doesn't start, plug and unplug the lab board.
- If Bennett still doesn't start, ask a GTA or member of staff for support.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk