Bennett/Bennett COMP32211: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) (Created page with " == Using Bennett on Campus and during labs == Bennett for COMP32211 is available for use in the Tootil labs. Ensure the board is connected to your machine, and powered up. Open a terminal and run <code>start_bennett_322</code> Bennett should start up connected to the RISC-V system. == Troubleshooting == If bennett doesn't work, in the first instance ask for assistance from a member of staff. For any other support outside of lab times, you can contact <code>cadto...") |
Mmapxam5 [PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
Ensure the board is connected to your machine, and powered up. | Ensure the board is connected to your machine, and powered up. | ||
For 32211, your Lab Manual should outline instructions on how to synthesize and image for the FPGA board and download it to the FPGA. | |||
Once you have done this, open a terminal and run <code>start_bennett_322</code> | |||
Bennett should start up connected to the RISC-V system. | Bennett should start up connected to the RISC-V system. | ||
| Line 12: | Line 14: | ||
== Troubleshooting == | == Troubleshooting == | ||
If bennett doesn't work, in the first instance ask for assistance from a member of staff. | If bennett doesn't work, in the first instance ask for assistance from a member of staff during lab time. | ||
For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | ||
Revision as of 09:36, 3 September 2025
Using Bennett on Campus and during labs
Bennett for COMP32211 is available for use in the Tootil labs.
Ensure the board is connected to your machine, and powered up.
For 32211, your Lab Manual should outline instructions on how to synthesize and image for the FPGA board and download it to the FPGA.
Once you have done this, open a terminal and run start_bennett_322
Bennett should start up connected to the RISC-V system.
Troubleshooting
If bennett doesn't work, in the first instance ask for assistance from a member of staff during lab time.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk