Bennett/Bennett COMP32211: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs)No edit summary |
Mmapxam5 [PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
||
| Line 4: | Line 4: | ||
Bennett for COMP32211 is available for use in the Tootil labs. | Bennett for COMP32211 is available for use in the Tootil labs. | ||
Ensure the board is connected to your machine | Ensure the board is connected to your machine and powered up. | ||
For COMP32211, your Lab Manual should outline instructions on how to synthesize an image for the FPGA board | For COMP32211, your Lab Manual should outline instructions on how to synthesize an image for the FPGA board and how to download it to the FPGA. Please refer to these instructions. | ||
Once you have done this, open a terminal and run <code>start_bennett_322</code> | Once you have done this, open a terminal and run <code>start_bennett_322</code> | ||
| Line 20: | Line 20: | ||
== Troubleshooting == | == Troubleshooting == | ||
If | If Bennett doesn't work, in the first instance, ask for assistance from a member of staff during lab time. | ||
For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | ||
Revision as of 13:50, 4 September 2025
Using Bennett on Campus and during labs
Bennett for COMP32211 is available for use in the Tootil labs.
Ensure the board is connected to your machine and powered up.
For COMP32211, your Lab Manual should outline instructions on how to synthesize an image for the FPGA board and how to download it to the FPGA. Please refer to these instructions.
Once you have done this, open a terminal and run start_bennett_322
Bennett should start up connected to the RISC-V system.
Other resouces
The RISC-V assembler used for COMP32211 is documented UOM RISC-V assembler
Troubleshooting
If Bennett doesn't work, in the first instance, ask for assistance from a member of staff during lab time.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk