Bennett/Bennett COMP32211

From Engineering Wiki
< Bennett
Revision as of 09:31, 3 September 2025 by gravatar Mmapxam5 [userbureaucrateditorinterface-adminsysopPHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) (Created page with " == Using Bennett on Campus and during labs == Bennett for COMP32211 is available for use in the Tootil labs. Ensure the board is connected to your machine, and powered up. Open a terminal and run <code>start_bennett_322</code> Bennett should start up connected to the RISC-V system. == Troubleshooting == If bennett doesn't work, in the first instance ask for assistance from a member of staff. For any other support outside of lab times, you can contact <code>cadto...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Using Bennett on Campus and during labs

Bennett for COMP32211 is available for use in the Tootil labs.

Ensure the board is connected to your machine, and powered up.

Open a terminal and run start_bennett_322

Bennett should start up connected to the RISC-V system.

Troubleshooting

If bennett doesn't work, in the first instance ask for assistance from a member of staff.

For any other support outside of lab times, you can contact cadtools@manchester.ac.uk