Bennett/Bennett COMP32211

Using Bennett on Campus and during labs

Bennett for COMP32211 is available for use in the Tootil labs.

Ensure the board is connected to your machine and powered up.

For COMP32211, your Lab Manual should outline instructions on how to synthesize an image for the FPGA board and how to download it to the FPGA. Please refer to these instructions.

Once you have done this, open a terminal and run start_bennett_322

Bennett should start up connected to the RISC-V system.

Other resouces

The RISC-V assembler used for COMP32211 is documented UOM RISC-V assembler

Troubleshooting

If Bennett doesn't work, in the first instance, ask for assistance from a member of staff during lab time.

For any other support outside of lab times, you can contact cadtools@manchester.ac.uk