Bennett/Bennett COMP22111

From Engineering Wiki
Jump to navigation Jump to search


Using Bennett on Campus and during labs

Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs.

You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett.

Open a terminal and run start_bennett_221

Bennett should start up connected to either MU0 or Stump.

Troubleshooting

If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session.

For any other support outside of lab times, you can contact cadtools@manchester.ac.uk