Bennett/Bennett COMP22111: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) (Created page with " == Using Bennett on Campus and during labs == Bennett for COMP15111 is available on all linux lab machines in the Kilburn building. Open a terminal and run <code>start_bennett_151</code> Bennett should start up with the RISC-V emulator running. == Troubleshooting == If bennett doesn't work, in the first instance ask for assistance from a member of staff. For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code>") |
Mmapxam5 [PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
== Using Bennett on Campus and during labs == | == Using Bennett on Campus and during labs == | ||
Bennett for | Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs. | ||
Bennett should start up | You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett. | ||
Open a terminal and run <code>start_bennett_221</code> | |||
Bennett should start up connected to either MU0 or Stump. | |||
== Troubleshooting == | == Troubleshooting == | ||
If | If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session. | ||
For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | ||
Latest revision as of 13:49, 4 September 2025
Using Bennett on Campus and during labs
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs.
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett.
Open a terminal and run start_bennett_221
Bennett should start up connected to either MU0 or Stump.
Troubleshooting
If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk