Bennett/Bennett COMP22111: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
|||
| Line 3: | Line 3: | ||
== Using Bennett on Campus and during labs == | == Using Bennett on Campus and during labs == | ||
Bennett for | Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use / take the COMP22111 lab boards out of tootil. | ||
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board you can start bennett. | |||
Open a terminal and run <code>start_bennett_221</code> | Open a terminal and run <code>start_bennett_221</code> | ||
Bennett should start up | Bennett should start up connected to either MU0 or Stump. | ||
== Troubleshooting == | == Troubleshooting == | ||
Revision as of 09:14, 4 September 2025
Using Bennett on Campus and during labs
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use / take the COMP22111 lab boards out of tootil.
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board you can start bennett.
Open a terminal and run start_bennett_221
Bennett should start up connected to either MU0 or Stump.
Troubleshooting
If bennett doesn't work, in the first instance ask for assistance from a member of staff.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk