Bennett/Bennett COMP22111: Difference between revisions
< Bennett
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
== Troubleshooting == | == Troubleshooting == | ||
If bennett doesn't work, in the first instance ask for assistance from a member of staff. | If bennett doesn't work, in the first instance ask for assistance from a member of staff in your scheduled lab session. | ||
For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | ||
Revision as of 11:55, 4 September 2025
Using Bennett on Campus and during labs
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use / take the COMP22111 lab boards away from the Tootil labs.
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board you will be able to start bennett.
Open a terminal and run start_bennett_221
Bennett should start up connected to either MU0 or Stump.
Troubleshooting
If bennett doesn't work, in the first instance ask for assistance from a member of staff in your scheduled lab session.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk