Bennett/Bennett COMP22111: Difference between revisions
< Bennett
Jump to navigation
Jump to search
 Mmapxam5 [    PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) No edit summary |
|||
| Line 3: | Line 3: | ||
== Using Bennett on Campus and during labs == | == Using Bennett on Campus and during labs == | ||
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use / take the COMP22111 lab boards away from the Tootil labs. | Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs. | ||
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board you will be able to start | You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett. | ||
Open a terminal and run <code>start_bennett_221</code> | Open a terminal and run <code>start_bennett_221</code> | ||
| Line 13: | Line 13: | ||
== Troubleshooting == | == Troubleshooting == | ||
If | If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session. | ||
For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | For any other support outside of lab times, you can contact <code>cadtools@manchester.ac.uk</code> | ||
Latest revision as of 13:49, 4 September 2025
Using Bennett on Campus and during labs
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs.
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett.
Open a terminal and run start_bennett_221
Bennett should start up connected to either MU0 or Stump.
Troubleshooting
If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk