Bennett/Bennett COMP22111
< Bennett
Jump to navigation
Jump to search
Revision as of 11:55, 4 September 2025 by 
Mmapxam5 [
![interface-admin]()
PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) (→Troubleshooting)
Mmapxam5 [PHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs) (→Troubleshooting)
Using Bennett on Campus and during labs
Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use / take the COMP22111 lab boards away from the Tootil labs.
You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board you will be able to start bennett.
Open a terminal and run start_bennett_221
Bennett should start up connected to either MU0 or Stump.
Troubleshooting
If bennett doesn't work, in the first instance ask for assistance from a member of staff in your scheduled lab session.
For any other support outside of lab times, you can contact cadtools@manchester.ac.uk