Bennett/Bennett COMP22111

From Engineering Wiki
< Bennett
Revision as of 13:49, 4 September 2025 by gravatar Mmapxam5 [userbureaucrateditorinterface-adminsysopPHRhYmxlIGNsYXNzPSJ0d3BvcHVwIj48dHI+PHRkIGNsYXNzPSJ0d3BvcHVwLWVudHJ5dGl0bGUiPkdyb3Vwczo8L3RkPjx0ZD51c2VyPGJyIC8+YnVyZWF1Y3JhdDxiciAvPmVkaXRvcjxiciAvPmludGVyZmFjZS1hZG1pbjxiciAvPnN5c29wPGJyIC8+PC90ZD48L3RyPjwvdGFibGU+] (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Using Bennett on Campus and during labs

Bennett for COMP22111 is available on the machines in the Tootil labs. Do not use/take the COMP22111 lab boards away from the Tootil labs.

You will have to create a bit file for MU0 or Stump, follow the lab manual for details. Once you have downloaded a bit file to the FPGA board, you will be able to start Bennett.

Open a terminal and run start_bennett_221

Bennett should start up connected to either MU0 or Stump.

Troubleshooting

If Bennett doesn't work, in the first instance, ask for assistance from a staff member in your scheduled lab session.

For any other support outside of lab times, you can contact cadtools@manchester.ac.uk

Retrieved from "https://wiki.cs.manchester.ac.uk/engineering/index.php?title=Bennett/Bennett_COMP22111&oldid=4063"